What is new in v5.3:
* Some changes in the config file (day-specific mode-related cost parameters for CAR and PT, more plausible teleported mode speeds and beeline distance factors)
* The config parameter changes required a recalibration of the model (modal split from SrV, trip distance distribution per mode from SrV, traffic counts from vmz)

updated files:
--> berlin-v5.3-10pct.config.xml
--> berlin-v5.3-10pct.plans.xml.gz

Internal notes:

1) b-7: runs-svn/open_berlin_scenario/v5.3-calibration/output_b-7 (input plans: berlin-v5.2-10pct.plans.xml.gz, 500 iterations, calibrating the ride mode)
2) b-10: runs-svn/open_berlin_scenario/v5.3-calibration/output_b-10 (input plans: selected output plans from b-7, 500 iterations, fixed ride mode, coarse calibration of all other modes)
3) b-29: runs-svn/open_berlin_scenario/v5.3-calibration/output_b-29 (input plans: output plans from b-10, 500 iterations, detailed calibration of all other modes)
--> selected output plans from run b-29: b-29.output_plans.selected.xml.gz
--> renamed to berlin-v5.3-10pct.plans.xml.gz

What is new in v5.4:
* Re-calibration for latest MATSim version (corrected access and egress walk speeds in combination with car trips)
* adjust default transit vehicle type to avoid delays (access and egress time = 0sec per passenger; capacity = 999999 pax/veh)

updated files:
--> berlin-v5.4-10pct.config.xml
--> berlin-v5.4-transit-vehicles.xml.gz
--> berlin-v5.4-10pct.plans.xml.gz

What is new in v5.5:
* TransitSchedule updated (new GTFS data with less construction sites, see berlin-v5.5-10pct/original-data/GTFS-VBB-20181214): no longer bus replacement for U5 Alexanderplatz - Strausberger Platz (and S3/5/7/9 after 21:00 between Alexanderplatz and Warschauer Str.), add pt services overlapping into following/from previous day, awaitDeparture = true -> no early pt departures
* Network file updated (old car/etc. network) to new TransitSchedule (replace pt network), higher pt link freespeed -> less and smaller pt delays due to slow network, but early pt arrivals persist
* Plans for new TransitSchedule and with routing modes

(TS)
*income dependent person scoring paramters -> income attributes written to plans in preprocess within run script -> person-specific mgnUtilityOfMoney
* => set global mgnUtilityOfMoney = 0.6, car-ASC to -1, bicycle-ASC to -1.8 and pt-ASC to -0.3

updated files:
--> berlin-v5.5-10pct.network.xml.gz
--> berlin-v5.5-transit-schedule.xml.gz
--> berlin-v5.5-transit-vehicles.xml.gz
--> berlin-v5.5-10pct.plans.xml.gz (TS)
--> berlin-v5.5-10pct.config.xml.gz (TS)